|
Haulage Information: Rock Destinations An explanation of fields and properties |
Haulage Information: Rock Destinations
To access this dialog:
-
In the Haulage Information dialog, select the Ore Destinations tab.
Each rock type/processing method should have a valid haulage destination.
If some of the destinations have limited storage capacities, you should ensure that, in total, there is enough capacity to accommodate the combined rock mass; otherwise, scheduling will be aborted before completion. You can also select to define two truck types. If you define two truck types the Haulage Information window displays three tabs: one for Exit Benches, one for Ore Destinations and one for Waste Destinations.
Field Details:
Truck and Ramp Parameters
Reference Speed: speed to be used to calculate EFH distances. Usually this is the flat haul speed of a fully loaded truck
Avg Wait at Load Point: average time haulage trucks are waiting at loading location before loading
Loading Time: average time to load a haulage truck
Avg Wait at Dump Point: average time haulage trucks are waiting at dumping location before unloading
Dumping Time: average time to unload a haulage truck.
Additional Wait Tim (min): mine-specific waiting time.
Total Wait Time: sum of above waiting times; it is calculated automatically
Truck Availability: average haulage truck availability including utilization and all down times
Truck Size: average truck load
Down Ramp Speed: speed of haulage trucks travelling down the ramp
Up Ramp Speed: speed of haulage trucks travelling up the ramp.
Ramp Gradient: ramp gradient in percentage
Destination: list box to add, edit, delete, change the order of the rock destinations
Parameters: select a destination and click this button to edit destination properties using the Define Mill Parameters dialog
Check Complete:message displays informing you if there are destinations left to define
OK/Cancel/Apply:
● OK: saves the data and closes the window,
● Cancel: closes the window without saving the data,
● Apply: saves the data without closing the window
|
Related Topics |
|
Haulage
Analysis Quick Start |
Copyright © Datamine Corporate Limited
JMN 20065_01_EN